Home > Monolithic Refractory

Monolithic Refractory

products +

Low Cement Castable

Low Cement Castable
1. Chemical component :≥ 65

2. Aggregate：Mullite & Corundum

3. Maximum service temperature：≥ 1600

4. Refractorinee:≥1750

5. Bulk density g/cm³：≥2.6

6. 1300℃Pressure strength after sintered:±0.5
High Alumina Castable

High Alumina Castable
High Alumina Castable is a kind of refractory castable which uses high alumina raw material as aggregates and the powder and then be added with binding agent. High aluminum refractory castable has high mechanical strength, good thermal shock resistance, good corrosion resistance. It's mainly used for furnace lining of boiler, blast furnace hot blast stove, heating furnace, ceramic kiln and various industrial furnaces.
Acid Resistant Castable

Acid Resistant Castable
1). High temperature resistance
2). High tensile strength
3). Acid erosion resistance
4). Great uniformity
5). Resistant to high humidity
6). High content of water and anchoring agent
7). High compression ratio
$High Alumina Refractory Cement$

High Alumina Refractory Cement

High Alumina Refractory Cement
Quick hardening and good early stage strength.

Excellent material for rapid repair.

High temperature resistance and wear resistance.

Has wide application fields such as kilns, furnaces, boilers, fireplaces, etc.

Thermal shock resistance, convenient for use.
Calcium Aluminate Cement

Calcium Aluminate Cement
High temperature resistance;
High early strength;
Rapid and complete wet hydration;
Stable physical performances;
Low water requirement;
Excellent biological acid erosion;
Acts as a bonding material in refractory castables;
Large hydration heat.
$Refractory Mortar$

Refractory Mortar

Refractory Mortar
Refractory Mortar is made into new type inorganic binder materials by choosing the same powder materials, adding inorganic binder, according to request of construction materials. There are four grades as below NT-1300,NT-1400,NT-1500,NT-1600,each material is divided into light weight and heavy weight,we can choose relevant refractory mortar according to different request of construction materials.
$Refractory Gunning Mix$

Refractory Gunning Mix

Refractory Gunning Mix
1.It has a certain degree of refractoriness.
2.Corrosion resistance and erosion resistance.
3.High adhesion rate.
4.Convenient construction and short construction period.
a. 25 or 50 kg per bag with moisture proof lining.
b. Standard marine packing or as your requirement.
Lightweight Insulating Castable

Lightweight Insulating Castable
(1) Small bulk density and low thermal conductivity, reducing the structural weight of the furnace or equipment.
(2) Excellent heat insulation and heat insulation, making the temperature in the furnace uniform.
(3) An integral lining material of any shape that can be used in a good project.
(4) Strong spalling resistance.
(5) Chemical resistance to acid and alkaline gases.
(6) Good workability and high bond strength.
Corundum Mullite Castable

Corundum Mullite Castable
(1) The construction is convenient.
(2) High-strength explosion-proof.
(3) High temperature resistance and high operating temperature.
(4) Under 0.2mpa pressure, the softening temperature of the load is high.
(5) High temperature volume stability, high strength.
(6) Anti-slag slag has strong chemical corrosion.
(7) The overall structure is stable and resistant to spalling.
(8) Quenching and rapid heat resistance, excellent thermal shock resistance.
High Strength Abrasion Resistant Castable

High Strength Abrasion Resistant Castable
High temperature abrasion resistance;
High crushing strength;
High modulus of rupture;
Good slag corrosion resistance;
Scouring resistance;
Good volume stability.
$Refractory Castable$

Refractory Castable

Refractory Castable
Refractory castables are a mixture of refractory aggregates, powders, binders and admixtures, which can withstand high temperatures of 1500°C to 1800°C. They are widely used in industrial kilns, high-temperature equipment, pizza ovens, etc.
Steel Ladle Castable

Steel Ladle Castable
Long life;
High temperature resistance;
Shock resistance & High strength;
High stability;
Ideal Ladle Refractories;
Application: Steel ladle castable mainly used in large,medium and small ladle.
Blast Furnace Iron Trough Castable

Blast Furnace Iron Trough Castable
Different types of refractory materials can be used as per the types of iron troughs. Iron storing troughs in middle and large scale steel mills usually adopt Al-Si-C series castable. Iron trough and slag trough castable has high mechanical strength, corrosion resistance, good flowability, and can be quickly dried. Iron trough castable should also has excellent thermal shock resistance.
Corundum High Strength Wear Resistant Castable

Corundum High Strength Wear Resistant Castable
Corundum high strength wear resistant castable adopts corundum, mullite as main raw materials, ultra fine micro powder, composite binder and additives are added into raw materials. It features in high strength, good abrasion resistance and excellent thermal shock resistance.
Corundum mullite high strength anti-wearing castable

Corundum mullite high strength anti-wearing castable
1100℃ Cold Crushing Strength Mpa ≥ : 100
Linear Dimensional Change % ≤：-0.3
Maximum Service Temperature ℃：1550
0.2MPa Refractoriness Under Load ℃ :≥1450
Bulk density g/cm³：≥2.7
Thermal Shock Resistance(900℃, water-cooling) ≥:25
$Wearing Resistant Plastic Refractory$

Wearing Resistant Plastic Refractory

Wearing Resistant Plastic Refractory
1.Good plasticity index, working temperature≥1790°C
2.Thermal shock resistance,
3.Good mechanical strength after drying,
4.Excellent abrasion resistance,
5.Plastic refractory can be classified into high alumina plastic refractory, fireclay based, corundum, silica, magnesia, chromite, zirconia, carborundum plastic refractory, etc
$Wearing Resistant Refractory Plastic$

Wearing Resistant Refractory Plastic

Wearing Resistant Refractory Plastic
RS Group produces various kinds of wearing resistant refractory plastic, including corundum mullite plastic refractory, silicon carbide plastic refractory and other high quality refractory plastic. Wearing resistant refractory plastic is bulk refractory, its main raw materials are calcined refractory aggregate, fireclay, and other binders, they are mixed and tempered to plastic bodies. During construction, pneumatic hammer or manual hammer can be used to ram it into any shapes and thickness.
Zirconium Silicate&Zircon Sand

Zirconium Silicate&Zircon Sand
Zirconium Silicate(Zirconium Oxide, Zircon Sand)，refractive index 1.93-2.01，good chemical stability，not affected by ceramic firing atmosphere, significantly improve embryo and glaze bonding, improve the hardness of glaze. It is widely used in the production of various architectural ceramics, sanitary ceramics, daily-use ceramics, first-class handicraft ceramics and so on.
Noted: We have Zircon Sand, Zircon Powder, Zirconium beads, etc.
Powder Aluminum Dihydrogen Phosphate

Powder Aluminum Dihydrogen Phosphate
Good thermal shock stability;

Wear resistance;

High temperature toughness;

Good mechanical strength in the low;

Medium and high temperature.
Liquid Aluminium Dihydrogen Phosphate

Liquid Aluminium Dihydrogen Phosphate
Good thermal shock stability;

Wear resistance;

High temperature toughness;

Good mechanical strength in the low;

Medium and high temperature.
Ramming Mass

Ramming Mass
High melting temperature & High purity;
Low thermal expansion;
Excellent thermal shock resistance;
Excellent anti-stripping capacity;
High temperature strength;
Free of chrome harming environment;
Volume stability & Good resistance to erosion.
Alkali Proof Castable

Alkali Proof Castable
1.Long service life,
2.High strength,
3.Low bulk density,
4.High refractoriness.
Silicon Carbide Powder

Silicon Carbide Powder
1.Silicon carbide(SiC, Carborundum), available in black and green
2.Stable Chemical Properties
3.High Thermal Conductivity
4.Small Thermal Expansion Coefficient
5.Good Wear Resistance
Noted: We also have various silicon carbide products, kiln furniture/shelves, etc.

Home Whatsapp Mail Message

TOP